What are the ways to prevent the battery from being salted?
What are the ways to prevent the battery from being salted? Today, the battery manufacturer Kang Lida's Xiaobian introduces you:
1. The battery is added for storage and storage before the device is used. In fact, once the battery is added with sulfuric acid, a chemical reaction begins to produce a salt. Therefore, the placement of new batteries will also be salted, resulting in the failure of new batteries that are installed on transportation vehicles.
2. The battery is corroded to increase the internal resistance during charging, causing a lack of charging.
3. It is forbidden to continue to discharge.
4. In the case of lack of charging, the battery cannot supply the starting current, which often causes fire to the frequently used vehicles. "When a battery with a full charge is used, it is possible to make the engine slow and idle to start, which consumes electricity. In turn, the battery does not get the generator to charge at the rate. The result, even though the battery is used all day. Charging, still can not be fully charged. And often lack of charging, battery salification increased. This vicious cycle continues, the battery completely failed.
5. Temperature influence. For example, when the temperature is turned hot, the salting rate is doubled with every 10 degrees of temperature added. During charging, if the outside temperature is high, when the temperature of the battery reaches 75 degrees, the internal resistance will increase, resulting in a lack of charging. When the temperature turns cold, the lubricating oil of the vehicle becomes thicker, which requires more power to start the vehicle, that is, the demanding battery has a greater discharge capacity. The result is accelerated accumulation of salt in the plate.
If you pay attention to the condition of the battery over-discharge, you know that the battery electrolyte is solidified at this time, which greatly damages the plate. Under normal conditions, when the charge reaches 100%, the specific gravity of the electrolyte is about 1.27. At this time, the solidification temperature of the electrolyte is -83 degrees Fahrenheit; when the specific gravity is about 1.2, the solidification temperature is -17 degrees Fahrenheit; if the specific gravity is 1.14 ( Also known as complete discharge), then only 8 degrees Fahrenheit solidified.
The above is the information compiled by the solar gel battery manufacturer Kang Lida. I hope to help you. If you want to know more information, you can contact us or visit our official website for more information.
Message
